Explorations · Light and time
Near a black hole
One clock stays close to a black hole; another provides a far-away reference. Change the near clock's radius and compare how much time accumulates in the ideal model.
Preparing the visualisation…
The near clock is held stationary. This is not an orbit, freefall or travel calculation. Rotation, charge and the practical limits of holding position are omitted; the drawing compresses radial spacing.
How to explore
- Choose a radius outside the event horizon.
- Start the clocks and compare their elapsed times.
- Change the radius to restart the comparison under a new condition.
What you are seeing
The displayed rate comes from the stationary Schwarzschild time relation. Each local observer's own clock runs normally; the comparison concerns how the two clocks relate in this geometry.
- Radius from the centre, expressed in horizon radii.
- Elapsed time on the distant and hovering clocks.
- The hovering clock’s rate as a percentage of the distant reference.
The model and its limits
The near clock is held stationary. This is not an orbit, freefall or travel calculation. Rotation, charge and the practical limits of holding position are omitted; the drawing compresses radial spacing.
You can inspect the controls and the changing numerical readouts alongside the drawing. The source notes distinguish catalogue measurements, calculated model results and illustrative choices.